,

POWER USB ACTIVE EXTENDER

Add to wishlist
Compare
  • Extends USB signals 100 meters over CAT5 twisted-pair cable[1]
  • USB 1.1 and 2.0 compatible
  • Provides 2 ports for USB devices
  • Supports up to 3 USB hubs (see specifications)
  • Works reliably without any programming or configuration
  • 24VDC power pack included

The Crestron® USB over Twisted Pair Extender (USB-EXT) delivers reliable USB signal extension for use in a boardroom, classroom, auditorium, command center, or residence. Without any special setup or configuration, the USB-EXT enables wire runs up to 100 meters (330 feet) over a single, low-cost twisted-pair cable[1].

The USB-EXT is compatible with USB 1.1 and High-Speed USB 2.0, supporting virtually any USB device such as keyboards and mice, game controllers, cameras, mobile devices, printers, hubs, and memory devices.[2] It is compatible with Windows® and Mac® computers without requiring any additional drivers.

The USB-EXT is composed of two extender components. The “local” extender connects to your computer or other USB host, while the “remote” extender provides connections for your USB devices at some remote location. Linking the two extender components requires just one run of inexpensive CAT 5 (or better) twisted-pair cable[1].

SKU: USB-EXT Categories: ,
Communications
Link USB extension up to 330 ft (100 m) over UTP or STP cable[1]
USB Device Support USB 1.1 and 2.0 compatible including 1.5 Mb/s low speed, 12 Mb/s full speed, and 480 Mb/s high-speed devices[2]
USB Hub Support Any signal chain may include up to 3 USB hubs plus one USB-EXT[2]
Maximum USB Devices 14 USB devices, or 3 USB hubs with 11 USB devices
USB Host Support EHCI (USB 2.0) and OHCI/UHCI (USB 1.1)
Connectors – Local Extender
Ground (1) M2 threaded hole;
Accepts an M2 type screw to provide a chassis ground lug
DC IN 24V@1A (1) 2.1 mm barrel DC power jack;
24 Volt DC power input (power pack included)
USB (1) USB Type B female (cable included);
USB 2.0 device port for connection to the USB host interface
Link (1) 8-pin RJ45 female, connects to Link port on the Remote Extender[1]
Connectors – Remote Extender
USB (2) USB Type A female, USB 2.0 host ports;
For connection of USB mice, keyboards, game controllers, cameras, mobile devices, printers, memory, hubs, and other USB devices[2];
Available Power: 500 mA @ 5 Volts DC per port
Ground (1) M2 threaded hole;
Accepts an M2 type screw to provide a chassis ground lug
Link (1) 8-pin RJ45 female, connects to Link port on the Local Extender[1]
Indicators – Local Extender
Power (1) Blue LED, indicates operating power supplied via local power pack
Link (1) Green LED, indicates a valid Link connection to the Remote Extender
Host (1) Green LED, indicates a valid connection to the USB host
Activity (1) Amber LED, indicates data activity on the Link interface
Indicators – Remote Extender
USB (2) Green/orange dual-color LEDs, green indicates a valid USB device connection and orange indicates a current draw in excess of 500 mA at the respective USB port
Power (1) Blue LED, indicates operating power supplied from the Local Extender via the Link connection
Link (1) Green LED, indicates a valid Link connection to the Local Extender
Host (1) Green LED, indicates a valid connection to the USB host at the Local Extender
Activity (1) Amber LED, indicates data activity on the Link interface
Power Requirements
Power Pack 1 Amp @ 24 Volts DC600 mA @ 100-240 Volts AC, 50/60 Hz power pack (included)[3]
Environmental
Temperature 32° to 122°F (0° to 50°C)
Humidity 20% to 80% RH (non-condensing)
Enclosure (Typical of 2)
Construction Metal, black finish
Dimensions (Typical of 2)
Height 1.02 in (26 mm)
Width 3.94 in (100 mm)
Depth 2.99 in (76 mm)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “POWER USB ACTIVE EXTENDER”

There are no reviews yet.

Related products

Brands Carousel